• nybanner

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio


Product Detail

Product Tags

Related Video

Feedback (2)

We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for 12v Relay, Current Sensor, Power Measurement Current Transformer, Sincerely stay up for serving you from the in the vicinity of future. You are sincerely welcome to go to our company to talk company face to face with each other and create long-term co-operation with us!
New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio Detail:

Description

Product Name Fe-Based 1K101 Amorphous Ribbon
P/N MLAR-2131
Width 5-80mm
Thickness 25-35μm
Saturation magnetic induction 1.56  Bs (T)
Coercivity  2.4  Hc (A/m)
Resistivity 1.30 (μΩ·m )
Magnetostriction coefficient 27 λs (ppm)
Curie temperature 410  Tc (℃)
Crystallization temperature 535  Tx (℃)
Density 7.18 ρ (g/cm3)
Hardness 960  Hv (kg/mm2)
Thermal expansion coefficient 7.6  (ppm/℃)

Application

● Mid-frequency power transformer core, distribution transformer core

● Toroidal uncut cores for smooth filtered output inductors and differential mode input inductors for switching power supplies

● Noise suppression in car stereos, toroidal uncut cores for car navigation system chokes

● Ring-cut cores for PFC power factor correction in air conditioning and plasma TVs

● High frequency rectangular cut cores for output inductors and transformers for switching power supplies, uninterruptible power supplies, etc.

● Toroidal, uncut cores for IGBTs, MOSFETs and GTOs pulse transformers

● High power density variable speed motors, stators and rotors for generators

Features

● Highest saturation magnetic induction among amorphous alloys-reduce components size

● Low coercivity- Improve components efficiency

● Variable Magnetic flux rate – By different core heat treatment processes to meet the requirements of different applications

● Good temperature stability- Can work at -55°C -130°C for long periods of time

● Cores used in transformers are 75% more energy efficient than S9 silicon steel cores in terms of no-load losses and 25% more energy °C efficient in terms of load losses

● Short strip production process and low production cost (see Fig. 1.1)

● The strip has a special microstructure which determines its excellent magnetic properties (Fig. 1.2) and performance stability.

● The composition and process parameters of the strip can be quickly adjusted to meet different usage requirements.

● For new energy solar grid-connected inverters

1

Figure 1.1 Amorphous ribbon production process

2

Figure 1.2 Bs versus Hc of different soft magnetic materials

Material comparison

Performance Comparison of Fe-based amorphous alloys with cold-rolled silicon steel

Basic parameters

Fe-based amorphous alloys

Cold-rolled silicon steel(0.2mm)
Saturation magnetic induction Bs (T)

1.56

2.03

Coercivity Hc (A/m) 2.4   25
Core losses(P400HZ/1.0T)(W/kg) 2 7.5
Core losses(P1000HZ/1.0T)(W/kg) 5 25
Core losses(P5000HZ/0.6T)(W/kg) 20 >150
Core losses(P10000HZ/0.3T)(W/kg) 20 >100
Maximum magnetic permeability (μm 45X104 4X104
Resistivity (mW-cm) 130 47
Curie temperature(℃) 400 740

1
2
3
440
5
6
7
11


Product detail pictures:

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures

New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of New Fashion Design for Toroid Inductor - Fe-Based 1K101 Amorphous Ribbon – Malio , The product will supply to all over the world, such as: Suriname, Norwegian, Paris, Our company has already have pass the ISO standard and we are fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will be the only one can have that products. We hoping that with our good products can bring our customers a great fortune.
  • The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Novia from Birmingham - 2017.08.16 13:39
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Jean from Portland - 2017.11.01 17:04
    Write your message here and send it to us