OEM/ODM Manufacturer 100a Input Split Core Current Transformer - Hall Effect Current Sensor Split Core Transducer – Malio
OEM/ODM Manufacturer 100a Input Split Core Current Transformer - Hall Effect Current Sensor Split Core Transducer – Malio Detail:
Description
| Product Name | Hall Effect Current Sensor Split Core Transducer |
| P/N | MLRH-2147 |
| Primary Rated Current | 20/50/100/200A/300A/400A |
| Output Voltage | Single Power 2.5±2V |
| Dual Power | Dual Power 0±4V |
| Insulation withstand voltage | 3KV/1min |
| Operating Frequency | 50-60Hz |
| Operating Temperature | -40℃ ~ +85℃ |
| Insulation | Epoxy resin encapsulated |
| Outer Case | Flame Retardant PBT |
| Application | Variable frequency electrical appliances， inverter， AC/DC variable-speed driveSwitched Mode Power Supplies (SMPS)， Uninterruptible Power Supplies (UPS)， |
Features
Easy installation
Window structure
Low power consumption， very good linearity
Only one design for wide current ratings range
High immunity to external interference
No insertion losses
Dual Power Hall Current Sensor
Electrical data (Ta=25ºC±5ºC)
| Rated input | IPN | 20/50/100 | A |
| Measuring range | IP | ±30/±75/±150 | A |
| Output voltage | Vo | ±4.0*(IP/IPN) | V |
| Load resistance | RL | >10 | KΩ |
| Supply voltage | VC | （±12 ～±15） ±5% | V |
| Accuracy | XG | @IPN,T=25°C < ±1.0 | % |
| Offset voltage | VOE | @IP=0,T=25°C < ±25 | mV |
| Temperature variation of VOE | VOT | @IP=0,-40 ~ +85°C < ±1.0/< ±0.5/< ±0.5 | mV/℃ |
| Temperature variation of VO | VOS | @IP=IPN,-40 ~ +85°C < ±2.5 | % |
| Hysteresis offset voltage | VOH | @IP=0,after 1*IPN < ±25 | mV |
| Linearity error | εr | < 1.0 | %FS |
| di/dt | > 100 | A/μs | |
| Response time | tra | @90% of IPN < 5.0 | μs |
| Power consumption | IC | @+15V <23 | mA |
| @-15V <4.5 | mA | ||
| Bandwidth | BW | @-3dB,IPN DC-20 | KHZ |
| Insulation voltage | Vd | @50/60Hz, 1min,AC ,1.5mA 4.0 | KV |
Ring Type Electrical data：（Ta=25°C，Vc=+12.0VDC,RL=2KΩ）
|
Parameter |
MLRH-50A/2V |
MLRH-100A/2V |
MLRH-200A/2V |
MLRH-300A/2V |
MLRH-400A/2V |
Unit |
|
| Rated input |
IPN |
50 |
100 |
200 |
300 |
400 |
A |
| Measuring range |
IP |
0～±50 |
0～±100 |
0～±200 |
0～±300 |
0～±400 |
A |
| Output voltage |
Vo |
|
2.500±2.0*(IP/IPN) |
|
V |
||
| Output voltage |
Vo |
@IP=0,T=25°C |
2.500 |
|
V |
||
| Load resistance |
RL |
|
>2 |
|
KΩ |
||
| Supply voltage |
VC |
|
+12.0 ±5% |
|
V |
||
| Accuracy |
XG |
@IPN,T=25°C |
< ±1.0 |
% |
|||
| Offset voltage |
VOE |
@IP=0,T=25°C |
< ±25 |
mV |
|||
| Temperature variation of VOE |
VOT |
@IP=0,-40 ~ +85°C |
< ±1.0 |
mV/℃ |
|||
| Hysteresis offset voltage |
VOH |
@IP=0,after 1*IPN |
< ±20 |
mV |
|||
| Linearity error |
εr |
< 1.0 |
%FS |
||||
| di/dt |
|
> 100 |
A/µs |
||||
| Response time |
tra |
@90% of IPN | < 3.0 |
µs |
|||
| Power consumption |
IC |
15 |
mA |
||||
| Bandwidth |
BW |
@-3dB,IPN |
DC-20 |
KHZ |
|||
| Insulation voltage |
Vd |
@50/60Hz, 1min,AC |
2.5 |
KV |
|||
General data：
| 参数 Parameter |
符号Symbol |
数值Value |
单位Unit |
| Operating temperature |
TA |
-40 ~ +85 |
°C |
| Storage temperature |
Ts |
-55~ +125 |
°C |
| Weight |
m |
70 |
g |
| Plastic material |
PBT G30/G15，UL94- V0; |
||
| Standards |
IEC60950-1:2001 |
||
|
EN50178:1998 |
|||
|
SJ20790-2000 |
|||
Dimensions (mm):
Remarks：
1,When the current will be measured goes through the primary pin of a sensor, the voltage will beMeasured at the output end. (Note: The false wiring may result in the damage the sensor).
2,Custom design in the different rated input current and the output voltage are available.
3,The dynamic performance is the best when the primary hole if fully filled with;
4, The primary conductor should be <100°C;
Rectangular Type Electrical data：（Ta=25°C，Vc=+12.0VDC,RL=2KΩ）
|
Parameter |
MLRH-200A/2V |
MLRH 4-600A/2V |
MLRH 4-800A/2V |
MLRH 4-1000A/2V |
MLRH 4-1200A/2V |
MLRH 4-2000A/2V |
Unit |
|
| Rated input |
IPN |
200 |
600 |
800 |
1000 |
1200 |
2000 |
A |
| Measuring range |
IP |
0～±200 |
0～±600 |
0～±800 |
0～±1000 |
0～±1200 |
0～±2000 |
A |
| Output voltage |
Vo |
|
2.500±2.0*(IP/IPN) |
|
V |
|||
| Output voltage |
Vo |
@IP=0,T=25°C |
2.500 |
|
V |
|||
| Load resistance |
RL |
|
>2 |
|
KΩ |
|||
| Supply voltage |
VC |
|
+12.0±5% |
|
V |
|||
| Accuracy |
XG |
@IPN,T=25°C |
< ±1.0 |
% |
||||
| Offset voltage |
VOE |
@IP=0,T=25°C |
< ±25 |
mV |
||||
| Temperature variation of VOE |
VOT |
@IP=0,-40 ~ +85°C |
< ±1.0 |
mV/℃ |
||||
| Hysteresis offset voltage |
VOH |
@IP=0,after 1*IPN |
< ±20 |
mV |
||||
| Linearity error |
εr |
< 1.0 |
%FS |
|||||
| di/dt |
|
> 100 |
A/µs |
|||||
| Response time |
tra |
@90% of IPN | < 7.0 |
µs |
||||
| Power consumption |
IC |
15 |
mA |
|||||
| Bandwidth |
BW |
@-3dB,IPN |
DC-20 |
KHZ |
||||
| Insulation voltage |
Vd |
@50/60Hz, 1min,AC |
6.0 |
KV |
||||
General data：
| 参数 Parameter |
符号Symbol |
数值Value |
单位Unit |
| Operating temperature |
TA |
-40 ~ +85 |
°C |
| Storage temperature |
Ts |
-55~ +125 |
°C |
| Weight |
m |
200 |
g |
| Plastic material |
PBT G30/G15，UL94- V0; |
||
| Standards |
IEC60950-1:2001 |
||
|
EN50178:1998 |
|||
|
SJ20790-2000 |
|||
Dimensions (mm):
Remarks：
1, When the current will be measured goes through the primary pin of a sensor, the voltage will be
Measured at the output end.(Note: The false wiring may result in the damage the sensor).
2, Custom design in the different rated input current and the output voltage are available.
3, The dynamic performance is the best when the primary hole if fully filled with;
4, The primary conductor should be <100°C;
Product detail pictures:
Related Product Guide:
We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for OEM/ODM Manufacturer 100a Input Split Core Current Transformer - Hall Effect Current Sensor Split Core Transducer – Malio , The product will supply to all over the world, such as: Maldives, Atlanta, Georgia, We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Kenya for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Rachel from Jamaica - 2017.03.08 14:45
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Rosalind from San Francisco - 2018.10.01 14:14
