OEM Customized China Good Consistency Multilayer Honeycomb Type 100A 0.1 Sehlopha sa DC Immune Current Transformer
Rea tseba hore re atleha ha feela re ka netefatsa tlholisano ea rona ea litšenyehelo tse kopaneng le melemo ea boleng bo holimo ka nako e le 'ngoe bakeng sa OEM Customized China Good Consistency Multilayer Honeycomb Type 100A 0.1 Class DC Immune Current Transformer, Mokhatlo oa rona esale o fana ka "moreki pele. ” mme ba ikemiseditse ho thusa bareki ho hodisa dikgwebo tsa bona tse nyane, e le hore e be Mookamedi e Moholo !
Rea tseba hore re atleha ha feela re ka netefatsa tlholisano ea rona e kopaneng ea litšenyehelo le melemo ea boleng bo holimo ka nako e le 'ngoe bakeng saChina DC Immune Current Transformer, Moetsi oa Transformer, Etsa bonnete ba hore u ikutloa u lokolohile ho re romella litlhoko tsa hau mme re tla u araba kapele.Joale re na le sehlopha sa boenjiniere se nang le boiphihlelo se tla u sebeletsa bakeng sa litlhoko tsohle tsa hau tse qaqileng.Mehlala ea mahala e ka romelloa molemong oa hau ho utloisisa lintlha tse ngata.Ka boiteko ba ho fihlela litlhoko tsa hau, etsa bonnete ba hore u ikutloa u lokolohile ho ikopanya le rona.O ka re romella mangolo-tsoibila mme oa ikopanya le rona ka kotloloho.Ho feta moo, re amohela ho etela fektheri ea rona ho tsoa lefats'eng ka bophara bakeng sa ho tseba mokhatlo oa rona hamolemo.le lintho.Khoebong ea rona le barekisi ba linaha tse ngata, hangata re latela molao-motheo oa tekatekano le melemo e tšoanang.Ha e le hantle ke tšepo ea rona ho rekisa, ka boiteko bo kopanetsoeng, khoebo ka 'ngoe le setsoalle molemong oa rona.Re labalabela ho fumana lipotso tsa hau.
Tlhaloso
| Lebitso la Sehlahiswa | Holo Effect Current Sensor Split Core Transducer |
| P/N | MLRH-2147 |
| Primary Rated Hajoale | 20/50/100/200A/300A/400A |
| Voltage e hlahisoang | Matla a le Mong 2.5±2V |
| Matla a mabeli | Matla a mabeli 0±4V |
| Insulation e mamella voltage | 3KV/1mins |
| Maqhubu a Tshebetso | 50-60Hz |
| Mocheso oa ho sebetsa | -40 ℃ ~ +85 ℃ |
| Insulation | Epoxy resin e kentsoeng |
| Nyeoe ea Kantle | PBT e nang le Flame Retardant |
| Akopo | Lisebelisoa tsa motlakase tse feto-fetohang, inverter, AC/DC e feto-fetohang-speed driveSwitched Mode Power Supplies (SMPS) , Uninterruptible Power Supplies (UPS) , |
Likaroloana
Ho kenya habonolo
Sebopeho sa fensetere
Tšebeliso e tlase ea matla, linearity e ntle haholo
Moralo o le mong feela bakeng sa mefuta e mengata ea lintlha tsa hajoale
Ho itšireletsa ka matla ho kena-kenana le kantle
Ha ho tahlehelo ea ho kenya
Sensor ea Hona joale ea Holo ea Matla a mabeli
Lintlha tsa motlakase (Ta=25ºC±5ºC)
| Lintlha tse kentsoeng | IPN | 20/50/100 | A |
| Lekhalo la ho lekanya | IP | ±30/±75/±150 | A |
| Matla a tsoang | Vo | ±4.0*(IP/IPN) | V |
| Ho hanyetsa moroalo | RL | >10 | KΩ |
| Matla a phepelo | VC | (± 12 ~ ± 15) ± 5% | V |
| Ho nepahala | XG | @IPN,T=25°C <±1.0 | % |
| Offset voltage | VOE | @IP=0,T=25°C <±25 | mV |
| Phapang e fapaneng ea mocheso oa VOE | VOT | @IP=0,-40 ~ +85°C < ±1.0/< ±0.5/< ±0.5 | mV/℃ |
| Phapang e fapaneng ea mocheso oa VO | VOS | @IP=IPN,-40 ~ +85°C <±2.5 | % |
| Hysteresis offset voltage | VOH | @IP=0,kamora 1*IPN <±25 | mV |
| Phoso ea linearity | εr | <1.0 | %FS |
| di/dt | > 100 | A/μs | |
| Nako ea ho arabela | tra | @90% ea IPN <5.0 | μs |
| Tšebeliso ea matla | IC | @+15V <23 | mA |
| @-15V <4.5 | mA | ||
| Bophahamo ba motlakase | BW | @-3dB,IPN DC-20 | KHZ |
| Insulation voltage | Vd | @50/60Hz, 1min,AC ,1.5mA 4.0 | KV |
Mofuta oa Ring data ea Motlakase: (Ta=25°C,Vc=+12.0VDC,RL=2KΩ)
| Paramethara | MLRH-50A/2V | MLRH-100A/2V | MLRH-200A/2V | MLRH-300A/2V | MLRH-400A/2V | Yuniti | |
| Lintlha tse kentsoeng | IPN | 50 | 100 | 200 | 300 | 400 | A |
| Lekhalo la ho lekanya | IP | 0 ~±50 | 0 ~±100 | 0 ~ ± 200 | 0 ~ ± 300 | 0 ~ ± 400 | A |
| Matla a tsoang | Vo |
| 2.500±2.0*(IP/IPN) |
| V | ||
| Matla a tsoang | Vo | @IP=0,T=25°C | 2,500 |
| V | ||
| Ho hanyetsa moroalo | RL |
| >2 |
| KΩ | ||
| Matla a phepelo | VC |
| + 12.0 ±5% |
| V | ||
| Ho nepahala | XG | @IPNT=25°C | <±1.0 | % | |||
| Offset voltage | VOE | @IP=0,T=25°C | <±25 | mV | |||
| Phapang e fapaneng ea mocheso oa VOE | VOT | @IP=0,-40 ~ +85°C | <±1.0 | mV/℃ | |||
| Hysteresis offset voltage | VOH | @IP=0,kamora 1*IPN | <±20 | mV | |||
| Phoso ea linearity | εr | <1.0 | %FS | ||||
| di/dt |
| > 100 | A/µs | ||||
| Nako ea ho arabela | tra | @90% ea IPN | <3.0 | µs | |||
| Tšebeliso ea matla | IC | 15 | mA | ||||
| Bophahamo ba motlakase | BW | @-3dB,IPN | DC-20 | KHZ | |||
| Insulation voltage | Vd | @50/60Hz, 1min,AC | 2.5 | KV | |||
Lintlha tse akaretsang:
| 参数 Parameter | 符号 Letšoao | 数值Boleng | 单位 Unit |
| Mocheso oa ho sebetsa | TA | -40 ~ +85 | °C |
| Mocheso oa polokelo | Ts | -55 ~ +125 | °C |
| Boima ba 'mele | m | 70 | g |
| Lintho tsa polasetiki | PBT G30/G15，UL94- V0; | ||
| Litekanyetso | IEC60950-1:2001 | ||
| EN50178:1998 | |||
| SJ20790-2000 | |||
Boholo (mm):
Maikutlo:
1, Ha motlakase o tla lekanngoa o feta pineng ea mantlha ea sensor, motlakase o tla lekanngoa qetellong ea tlhahiso.(Tlhokomeliso: Wiring ea bohata e ka baka tšenyo ea sensor).
2, Moralo oa moetlo ka mefuta e fapaneng e kentsoeng ea hona joale le motlakase oa tlhahiso ea fumaneha.
3, Ts'ebetso e matla ke eona e ntle ka ho fetisisa ha lesoba la mantlha le tlatsitsoe ka botlalo;
4, Mokhanni ea ka sehloohong e lokela ho ba <100 ° C;
Lintlha tsa Motlakase tsa Mofuta oa Rectangular: (Ta=25°C, Vc=+12.0VDC,RL=2KΩ)
| Paramethara | MLRH-200A/2V | MLRH4-600A/2V | MLRH4-800A/2V | MLRH4-1000A/2V | MLRH4-1200A/2V | MLRH4-2000A/2V | Yuniti | |
| Lintlha tse kentsoeng | IPN | 200 | 600 | 800 | 1000 | 1200 | 2000 | A |
| Lekhalo la ho lekanya | IP | 0 ~ ± 200 | 0 ~ ± 600 | 0 ~ ±800 | 0 ~ ± 1000 | 0 ~ ± 1200 | 0 ~ ± 2000 | A |
| Matla a tsoang | Vo |
| 2.500±2.0*(IP/IPN) |
| V | |||
| Matla a tsoang | Vo | @IP=0,T=25°C | 2,500 |
| V | |||
| Ho hanyetsa moroalo | RL |
| >2 |
| KΩ | |||
| Matla a phepelo | VC |
| +12.0±5% |
| V | |||
| Ho nepahala | XG | @IPN,T=25°C | <±1.0 | % | ||||
| Offset voltage | VOE | @IP=0,T=25°C | <±25 | mV | ||||
| Phapang ea mocheso oa VOE | VOT | @IP=0,-40 ~ +85°C | <±1.0 | mV/℃ | ||||
| Hysteresis offset voltage | VOH | @IP=0,kamora 1*IPN | <±20 | mV | ||||
| Phoso ea linearity | εr | <1.0 | %FS | |||||
| di/dt |
| > 100 | A/µs | |||||
| Nako ea ho arabela | tra | @90% ea IPN | <7.0 | µs | ||||
| Tšebeliso ea matla | IC | 15 | mA | |||||
| Bophahamo ba motlakase | BW | @-3dB,IPN | DC-20 | KHZ | ||||
| Insulation voltage | Vd | @50/60Hz, 1min,AC | 6.0 | KV | ||||
Lintlha tse akaretsang:
| 参数 Parameter | 符号 Letšoao | 数值Boleng | 单位 Unit |
| Mocheso oa ho sebetsa | TA | -40 ~ +85 | °C |
| Mocheso oa polokelo | Ts | -55 ~ +125 | °C |
| Boima ba 'mele | m | 200 | g |
| Lintho tsa polasetiki | PBT G30/G15，UL94- V0; | ||
| Litekanyetso | IEC60950-1:2001 | ||
| EN50178:1998 | |||
| SJ20790-2000 | |||
Boholo (mm):
Maikutlo:
1, Ha motlakase o tla lekanngoa o feta pineng ea mantlha ea sensor, motlakase o tla ba teng
E lekanyetsoa qetellong ea tlhahiso.(Hlokomela: Wiring ea bohata e ka baka tšenyo ea sensor).
2, Moralo oa tloaelo ka mefuta e fapaneng e kentsoeng ea hona joale le motlakase oa tlhahiso ea fumaneha.
3, Ts'ebetso e matla ke eona e ntle ka ho fetisisa ha lesoba la mantlha haeba le tletse ka botlalo;
4, Mokhanni ea ka sehloohong e lokela ho ba <100 ° C;
Rea tseba hore re atleha ha feela re ka netefatsa tlholisano ea rona ea litšenyehelo tse kopaneng le melemo ea boleng bo holimo ka nako e le 'ngoe bakeng sa OEM Customized China Good Consistency Multilayer Honeycomb Type 100A 0.1 Class DC Immune Current Transformer, Mokhatlo oa rona esale o fana ka "moreki pele. ” mme ba ikemiseditse ho thusa bareki ho hodisa dikgwebo tsa bona tse nyane, e le hore e be Mookamedi e Moholo !
OEM e hlophisitsoengChina DC Immune Current Transformer, Moetsi oa Transformer, Etsa bonnete ba hore u ikutloa u lokolohile ho re romella litlhoko tsa hau mme re tla u araba kapele.Joale re na le sehlopha sa boenjiniere se nang le boiphihlelo se tla u sebeletsa bakeng sa litlhoko tsohle tsa hau tse qaqileng.Mehlala ea mahala e ka romelloa molemong oa hau ho utloisisa lintlha tse ngata.Ka boiteko ba ho fihlela litlhoko tsa hau, etsa bonnete ba hore u ikutloa u lokolohile ho ikopanya le rona.O ka re romella mangolo-tsoibila mme oa ikopanya le rona ka kotloloho.Ho feta moo, re amohela ho etela fektheri ea rona ho tsoa lefats'eng ka bophara bakeng sa ho tseba mokhatlo oa rona hamolemo.le lintho.Khoebong ea rona le barekisi ba linaha tse ngata, hangata re latela molao-motheo oa tekatekano le melemo e tšoanang.Ha e le hantle ke tšepo ea rona ho rekisa, ka boiteko bo kopanetsoeng, khoebo ka 'ngoe le setsoalle molemong oa rona.Re labalabela ho fumana lipotso tsa hau.
