Fe-Dabere 1K101 Amorphous Ribbon
Nkọwa
| Aha ngwaahịa | Fe-Dabere 1K101 Amorphous Ribbon |
| P/N | MLAR-2131 |
| Width | 5-80mm |
| Nkeckness | 25-35μm |
| Induction magnetik saturation | 1.56 Bs (T) |
| Mmanye | 2.4 Hc (A/m) |
| Nguzogide | 1.30 (μΩ·m) |
| Ọnụọgụ magnetik | 27 nkeji (ppm) |
| Curie okpomọkụ | 410 Tc (℃) |
| Crystallization okpomọkụ | 535 Tx (℃) |
| Njupụta | 7.18 ρ (g/cm3) |
| Isi ike | 960 Hv (kg/mm2) |
| Ọnụọgụ mgbasawanye okpomọkụ | 7.6 (ppm/℃) |
Ngwa
● Igwe ngbanwe nke etiti oge, isi ihe nkesa nkesa
● Toroidal cores a na-egbutughi maka inductor mmepụta akọrọ nke ọma na inductor mode dị iche iche maka ịgbanye ọkụ ọkụ.
● Mkpọtụ mkpọtụ na stereos ụgbọ ala, cores a na-egbutughị nke toroid maka sistemụ igodo ụgbọ ala.
● Mkpọchi mgbanaka maka mgbazi ihe ike PFC na ntụ oyi na TV plasma
● Elu ugboro akụkụ akụkụ anọ ịkpụ cores maka mmepụta inductor na transformers maka ịgbanwee ihe ọkụ, ọkụ na-adịghị akwụsị akwụsị, wdg.
● Toroidal, cores na-adịghị akpụ maka IGBT, MOSFET na GTOs pulse transformers.
● Nnukwu ike njupụta na-agbanwe ọsọ moto, stators na rotors maka generators
Atụmatụ
● Induction magnetik saturation kacha elu n'etiti alloys amorphous-belata nha nke akụkụ
● Mmanye dị ala - kwalite arụmọrụ akụrụngwa
● Ọnụego ndọta na-agbanwe agbanwe - Site na usoro ọgwụgwọ okpomọkụ dị iche iche iji mezuo ihe achọrọ nke ngwa dị iche iche
● Ezigbo nkwụsi ike nke okpomọkụ- Nwere ike ịrụ ọrụ na -55 ° C -130 ° C ruo ogologo oge
● Cores eji na transformers bụ 75% ike karịa S9 silicon steel cores n'ihe na-efu efu na 25% ọzọ ume °C na-arụ ọrụ nke ọma n'ihe gbasara nkwụsị ibu.
● Usoro mmepụta obere warara na ọnụ ahịa mmepụta dị ala (lee foto 1.1)
● The warara nwere pụrụ iche microstructure nke na-ekpebi ya magburu onwe magnetik Njirimara (Fig. 1.2) na arụmọrụ kwụsie ike.
● Enwere ike gbanwee ihe mejupụtara na usoro usoro nke warara ngwa ngwa iji mezuo ihe achọrọ dị iche iche.
● Maka ọkụ ọkụ ọhụrụ ejikọrọ inverters
Ọgụgụ 1.1 Usoro mmepụta rịbọn amorphous
Ọgụgụ 1.2 Bs na Hc nke ihe ndọta dị nro dị iche iche
Ntụnyere ihe
| Arụmọrụ atụnyere Fe-based amorphous alloys nwere oyi-akpọrela ígwè silicon ígwè | ||
| Ntọala ntọala | Amorphous alloys dabere na Fe | Silikoni igwe anaghị agba nchara (0.2mm) |
| Saturation magnetik induction Bs (T) | 1.56 | 2.03 |
| Mmanye Hc (A/m) | 2.4 | 25 |
| Isi mfu(P400HZ/1.0T)(W/kg) | 2 | 7.5 |
| Isi mfu(P1000HZ/1.0T)(W/kg) | 5 | 25 |
| Isi mfu(P5000HZ/0.6T)(W/kg) | 20 | 150 |
| Isi mfu(P10000HZ/0.3T)(W/kg) | 20 | 100 |
| Oke magnetik permeability (μm) | 45X104 | 4X104 |
| Resistivity (mW-cm) | 130 | 47 |
| Ọnọdụ okpomọkụ (℃) | 400 | 740 |
